RealBagsFit checker

Measurement guide

Measure what the laptop has to pass through.

A sleeve can have enough room inside and still have a short zip opening. Check the device, the inside, and the opening separately.

Measure the laptop as you carry it

Close the laptop. Measure across both sides of the lid and over the thickest point, including the feet and anything that stays on when you pack it. If you use a shell or an inner sleeve, measure that outside envelope. Apple’s model specifications list chassis dimensions separately from the screen diagonal.

Take the usable dimensions inside the sleeve

Measure width across the opening direction, depth from opening to bottom, and thickness between the sides. Use the narrowest usable point after accounting for seams and padding. A manufacturer may list precise inside measurements, as TOM BIHN does for its Cache sleeves. Exterior measurements include fabric and lining.

Measure the opening at its narrowest point

Open the zipper fully. Measure the straight span between the obstructions on each side, then measure the gape, the clear space between the lips where the thick edge passes. Don’t pull the bag wider than you would when packing. If a flap or closure crosses that path, check it too.

Worked example

A 304.1 mm laptop fits within a 323 mm sleeve. Its width still exceeds a 299 mm opening by 5.1 mm. A different bag with the same inside capacity and a longer opening can solve that problem.

Leave some room to insert and remove it

Choose extra room for the shape and material you’re dealing with. A near-zero margin is a reason to test the actual bag. If you can turn the laptop sideways and insert it straight, test that direction using the other side of the device across the opening.

Check my measurements

Manufacturer specifications

Specification pages checked November 22, 2026.